Corpus and frame connector made of spring steel, with a stop.

Modular Anti Torsion is a torsional, rigid, concealed, self-tightening connector with a 32mm grid. It can be screwed on and disassembled, and is available in two versions. The connectors have a stop and prevent the components from being pushed through. Both versions consist of a right and a left component. The mounting can be carried out with PH- or SK-screws (Ø = 5 mm). The screw length can be determined as needed.

Due to the construction and type of the material (spring steel), a permanent tightening pressure is ensured after assembly.

The groove needed for the Modular connector can be done with a table milling machine, hand router, long-hole drilling machine or a CNC machining center.

The connectors can be used for corpus and frame joints with all solid and plywood components from16 mm thickness.

• Non-visible – fully concealed connector for corpus and frame joins.
• Durable – with longer PH or SK screws (approx. 5 x 50), the strength of the connector can be increased significantly.
• Efficient – for a time and cost saving pre-assembly, using a CNC machining center, the 5076 and 2076 should be lowered by approximately 3 mm and the respective counterpart 5075 by 9 mm or 2075 by approximately 11 mm
• Simple – this positioning can be executed exactly via the CNC machining center and enables the precise screwing-on of the connectors.

Two options: