Cookies help us to use and improve our website. By using this site, you agree to the use of cookies. More information: privacy policy
MODULAR Anti Torsion connectors
MODULAR Anti Torsion connectors
Corpus and frame connector made of spring steel, with a stop.
Modular Anti Torsion is a torsional, rigid, concealed, self-tightening connector with a 32mm grid. It can be screwed on and disassembled, and is available in two versions. The connectors have a stop and prevent the components from being pushed through. Both versions consist of a right and a left component. The mounting can be carried out with PH- or SK-screws (Ø = 5 mm). The screw length can be determined as needed.
Due to the construction and type of the material (spring steel), a permanent tightening pressure is ensured after assembly.
The groove needed for the Modular connector can be done with a table milling machine, hand router, long-hole drilling machine or a CNC machining center.
The connectors can be used for corpus and frame joints with all solid and plywood components from16 mm thickness.
- Non-visible – fully concealed connector for corpus and frame joins.
- Durable – with longer PH or SK screws (approx. 5 x 50), the strength of the connector can be increased significantly.
- Efficient – for a time and cost saving pre-assembly, using a CNC machining center, the 5076 and 2076 should be lowered by approximately 3 mm and the respective counterpart 5075 by 9 mm or 2075 by approximately 11 mm
- Simple – this positioning can be executed exactly via the CNC machining center and enables the precise screwing-on of the connectors.
Two options:
14 mm
10 mm
42 mm
16 mm
32 mm
12 mm
13,5 mm
42 mm
19 mm
32 mm
Screwed in by using PH-screws Ø 4,5 mm
One connector, no rotation, concealed, self-tightening connector for 32 mm system, demountable
Spindle moulder, plunge router, CNC-machine
Solid wood, wood panels, composite materials from 16 mm thickness up
Prevents rotation in furniture parts where height of the part is as small as 50 mm