RICON post and beam / main and secondary beam
|
|
 Very high power handling – also eccentrically (with reinforcement plate a load of glass
up to 860 kg could be reached)
Slim view profile – from 50 mm and up
Universal – for all structural timber constructions such as structural glazing or conservatory constructions to connect posts with beams, used for wood to wood connections, but also suitable for connections onto concrete or steel
Concealed – mounted concealed, but still dismountable
Versatile connections – both single and double connections are possible
Flexible – mounting possible from outside to inside
More Information
 |
|
The dove-tail stamping makes it very easy to catch the CS-screws and push together the connector. It also ensures tightness. |
|
|
|
RICON consists of two identical parts. It is made of premium quality steel, is hot dip galvanized and produced in Austria. |
|
|
|
Ø 5 mm and Ø 8 mm RICON CS-screws with Torx 25 drive. These adjustable holding-screws compensate fabrication tolerances. The reinforced shaft with integrated stop guarantees exact positioning. |
|
|
|
Clip in the stainless spring steel stirrup into the locating slots prior to final assembly. It locks the connection against the slide-in direction and can be released again. |
|
RICON-System Options
Single connection (EA) RICON 120x40 with RICON CS-screws
|
Double connection (DA) RICON 120x40 with insert and RICON CS-screws
|
Single- or double connection (EAR) RICON 120x40 with insert and CS-screws
|
|
GIGANT for main and secondary beam
|
|
Highly resistant – is in and against the slide-in direction and on ductility mechanical
load capacity
Short pushing – applicable to pergolas, winter gardens, wooden house constructions
and also to timber engineering
Seals joint – self-tightening
Fire safety (DIN 4102-2) – through concealed mounting
(F30 circling structures ≥ 20 mm)
By clip lock – permanent bonding
More Information
 |
|
The V-shaped and the beveled fork part make it very easy to position and assemble the connector. |
|
|
|
Specially designed screws (10 mm) with reinforced shaft and cut point for fast and accurate installation. |
|
|
|
The clip lock automatically locks in all load directions
Hint: Use only the centre holes of the opposite connector
half to fasten it. |
|
|
|
GIGANT is made of premium quality steel, is optional bluegalvanized or hot-dip galvanised and produced in Austria. |
|
GIGANT-System sizes
GIGANT 120x40 with KNAPP CS-screws
|
GIGANT 150x40 with KNAPP CS-screws
|
GIGANT 180x40 with KNAPP CS-screws
|
|
|
