WALCO 40 wall connector for panelized construction
|
|
 Application – wall connectors in the wood frame construction and wood construction board, wooden frame-like laminated timber walls are positively connected to each other.
High degree of prefabrication – no screw work necessary on job-site
Plug-in connector – the wall parts are put together without screwing
Self-tensioning, stable and invisible – the structure is stable at the first corner
For standardization – timber according to DIN 1052 and Eurocode 5 (DIN VENV 1995-1-1 1995-06)
More Information
 |
|
The slotted and beveled fork part makes it very easy
to position and assemble the connector. It also ensures
tightness. |
|
|
|
Tightness can be adjusted with the KNAPP CS-screws |
|
|
|
WALCO 40 is made of premium quality steel, is bluegalvanized and produced in Austria. |
|
|
|
Specially designed screws with reinforced shaft and
cut-point for fast and accurate installation. |
|
WALCO 40 - Set
WALCO 240/40 Set with CS-screws
|
|
WALCO V wall connector for prefabricated houses
|
|
Application – wall connector for statically calculated connection
of complete wall units for prefabricated-house building
Easy retraction of the holding screw by generous shaped receiving hopper (V-system)
Fast and precise installation on job-site – enables a production
of complete closed (finished) wall units in factories
Universal use for different wood types, steel, concrete
No milling of plate thickness 13 mm and 15 mm needed
Stable and resistant from the first wall corner without scaffolding
The spring retaining allows walls to be installed in between two walls
without side-ways space
The retaining holding screw allows adjustment of the gap width in
between wall units, e. g. for gaskets or to compensate building tolerances.
The collar bolts are fastened straight into working pieces
(with or without middle layers)
More Information
|
|
The clip lock, made from stainless spring steel, locks the connection against slide-in direction and supports the starting power ZA from one wall unit to the other. |
|
|
|
The V-shape fork catches the holding screw and lines them in exact position. |
|
|
|
3-5 pcs. Walco V hex-head wood screws 6x50 mm |
|
|
|
The Walco V holding screw is the counter part to the connector. It comes in four different versions. |
|
|
|
Walco V is made of premium quality steel, is hot-dip galvanized and produced in Austria. |
|
WALCO V-System holding screws / sizes
Collar screws (KS) for wood frame walls in prefabricated houses
|
Adjustable retaining screw (EH) for wood frame walls in the wood frame and commercial building
|
|
Screw-bolt collar (CV) for laminated timber walls, length of the screws as required
|
Spring-loaded retaining screw (GH) to retract between two fixed walls (for example, installing walls)
|
|
|
|
