GIGANT incl. screwing

GIGANT-System

Art.-No.: GIGANT-System

Set in packaging: 25

Characteristic resistance in or against the insertion direction

F_2,Rk 12,1 kN*	GIGANT 120/40 electro galvanized GIGANT 120/40 hot-dip galvanized
F_2,Rk19,0 kN*	GIGANT 150/40 electro galvanized GIGANT 150/40 hot-dip galvanized
F_2,Rk 27,0 kN*	GIGANT 180/40 electro galvanized with clip lock GIGANT 180/40 hot-dip galvanized with clip lock
F_2,Rk 30,9 kN*	GIGANT 180/40 electro galvanized without clip lock GIGANT 180/40 hot-dip galvanized without clip lock

* All typical values appear in the insertion direction and refer to the type of wood GL 24h (BS 11) and are taken from the construction licensing. Any liability is excluded if other screws are used as the framework of the European Technical Approval (ETA-10/0189) KNAPP approved screws. Packaging unit (VE) = 25 pair

Productdetails

Highly resistant ─ is in and against the slide-in direction and on ductility mechanical load capacity

Short pushing ─ applicable to pergolas, winter gardens, wooden house constructions and also to timber engineering

Seals joint ─ self-tightening

Resistance to fire (DIN 4102-2 and EN 1995-1-2) ─ through concealed mounting (circling structures ≥ 20 mm)

By clip lock ─ permanent bonding

	The V-shaped and the beveled fork part make it very easy to position and assemble the connector.

	Specially designed screws (10 mm) with reinforced shaft and cut-point for fast and accurate installation.

	The clip lock automatically locks in all load directions. Hint: Use only the centre holes of the opposite connector half to fasten it.

	GIGANT is made of premium quality steel, is optional electro galvanized or hot-dip galvanized.